12
MAINTENANCE AND OPTIONS
3
■
Periodic maintenance
q
Keep the equipment as clean as possible.
• Use a soft cloth to remove dirt, dust and water.
w
Check all hardware for loose screws, bolts, etc.
e
Check cables and terminal connections.
■
Fuse replacement
If the fuse blows or the MarineCommander™ stops
functioning, find the source of the problem and have
it repaired. Then, replace the blown fuse with a new,
properly rated one, as shown to the right.
■
Options
•
EX-3187
display
extension
unit
5 m (16.4 ft) extension cable for the Display unit.
Allows you to install the Main unit and Display unit
up to 20 m (65.6 ft) apart. (one Display cable+three
EX-3187s)
• MXR-5000R/T
radar
unit
Allows you to add Radar to the MarineCommander™.
• MXF-5000
fish
finder
unit
Allows you to add the Fish Finding to the MarineCommander™.
• MXA-5000
ais
receiver
Allows you to receive other vessel’s information,
such as the vessel name, MMSI code, vessel type,
position data, speed, course, destination and more.
• MXG-5000
gps
receiver
Allows you to receive GPS information.
•
OPC-1895
connection
cable
Allows you to connect the Icom MarineCommander™
system. (20 m: 65.6 ft)
Fuse rating: 15 A for 12 V power source
7.5 A for 24 V power source
Approved Icom optional equipment is designed for opti-
mal performance when used with Icom equipment.
Icom is not responsible for the destruction or damage to
Icom equipment in the event the Icom equipment is used
with equipment that is not manufactured or approved by
Icom.
Continued, reliable operation of the main unit depends
on how you care for your equipment.
The simple maintenance tips that follow can help you
save time and money, and avoid premature equipment
failures.
R
WARNING! BE SURE the
MarineCommander
’s
power is OFF before performing any maintenance.
