15
4
DISTANCE AND DIRECTION MEASUREMENTS
■
Bearing and Distance measurement
This radar has two Electronic Bearing Lines (EBL) to
indicate the target direction from your ship or a target.
D
Using the EBL and VRM
EBL1
VRM1
EBL2
EBL1
readout
EBL2
readout
VRM2
VRM1 readout
VRM2 readout
q
Push [
p
], [
q
], [
t
] or [
u
] to move the cursor onto
the desired target.
w
Push [EBL1 (VRM1)]/[
] to display the
EBL1 and VRM1.
• Push [
t
] or [
u
] to rotate the electronic bearing line.
• Push [
u
] to rotate clockwise and push [
t
] to rotate
counterclockwise.
• Push [
p
] or [
q
] to increase or decrease the variable
range marker ring size.
• The EBL1 and VRM1 readouts indicate the target bear
-
ing and distance.
• The EBL readouts indicate the target bearing;
0 to 360°R: Relative direction, when ‘360°R’ is se
-
lected in the DIRECTION item of the
FUNCTION menu. (See page 5)
P/S 0 to 180°: Bow direction, when ‘PT/SB’ is selected
in the DIRECTION item of the FUNC-
TION menu. (See page 5)
0 to 360°T*: True or magnetic bearing, when select
-
ing ‘TRUE’ in the DIRECTION item of the
FUNCTION menu. (See page 5)
*Bearing data is required. (p. 43)
e
Push [EBL1 (VRM1)]/[
] to clear EBL1
and VRM1.
• Cursor remains on the display.
r
Push [
p
], [
q
], [
t
] or [
u
] to move the cursor onto
the desired target.
t
Push [EBL2 (VRM2)]/[
] to display
EBL2 and VRM2 on the display.
• When EBL1 and VRM1 are displayed, the beginning
of EBL2 and VRM2 appears at the intersection point of
EBL1 and VRM1.
• EBL2 and VRM2 disappear when [EBL1 (VRM1)]/
[
] is pushed.
y
To clear EBL1 and VRM1, push [EBL1 (VRM1)]/
[
].