A-6815H-1EX-
y
Printed in Japan
© 2009–2014 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
COM PORT CONFIRMATION (STEP 3)
After the driver installation has completed, confirm the
driver availability and the port number.
The COM port number is used to set communication
with the cloning software.
q
Select “Desktop” and click the folder icon at the bot
-
tom of the screen.
• The “Libraries” window is displayed
Right-Click [Computer], and then click [Properties],
w
as shown below.
• The “System” window appears.
Click [Device Manager].
e
• “Device Manager” appears.
Click the “
r
” next to “Ports (COM&LPT).”
Confirm “Icom USB-to-Serial Comm Port (COM
✱
)”
is displayed.
• In this example, the COM port number is “3.”
• If the COM port number is not displayed, or sever
-
al numbers are displayed at the same time like
“Icom USB-to-Serial Comm Port (COM
✱
)(COM
✱
),”
the driver may not be properly installed. In such
case, uninstall the USB driver and install it again.
•
You can uninstall the program using the
“Uninstall
a program
” in the Windows Control Panel.
Click
q
Right-Click
w
Click
Click
q
Click
w
Confirm
CABLE CONNECTION (STEP 2)
After completing Step 1, connect the cloning cable to
the PC, then the PC automatically starts the USB-to-
Serial Comm Port installation.
Connect the cloning cable to the USB cable, and
q
then the USB cable to the PC’s USB port, as illus
-
trated below.
• Attach the Ferrite EMI filter to the strain relief of
the USB cable.
USB cable
to the USB port
Cloning cable
Strain relief
The status is displayed at the bottom of the desktop
w
screen.
Wait a moment until it disappears.
For your information: If the status is clicked, the
“Installing Icom USB-to-Serial Comm Port (COM
✱
)”
dialog is displayed.
• “
✱
” is the number of the COM port.
When the status disappears, the installation is com
-
e
pleted.
Rebooting the PC is recommended.
Shows the status
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom,
Germany, France, Spain, Russia and/or other countries.
Adobe and Reader are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
