INSTRUCTIONS
RC-28
REMOTE ENCODER
Thank you for choosing the RC-28
remote
encoder
.
Connect the RC-28 to a PC USB port, and operate
the RS-BA1
ip
remote
control
software
on the
PC.
READ ALL INSTRUCTIONS
carefully and
completely before using the RC-28.
R
WARNING! NEVER
disassemble the RC-28.
Incorrect reassembly may result in a fire hazard or
electric shock.
R
WARNING! NEVER
operate or touch the
control-
ler
with wet hands. This may result in an electric shock
or damage the controller.
R
WARNING! NEVER
let metal, wire or other
objects protrude into the
controller
. This may result in
an electric shock.
CAUTION: DO NOT
expose the controller to rain,
snow or any liquids.
CAUTION: DO NOT
strike or otherwise impact the
controller.
This may damage the
controller.
KEEP
the controller out of reach of unauthorized
persons.
DO NOT
use harsh solvents such as Benzine or
alcohol to clean the controller, because as they will
damage the controller’s surfaces.
DO NOT
connect the controller to other than a PC.
Otherwise it will not work properly.
PRECAUTIONS
SPECIFICATIONS
Items Qty.
USB cable (approximately 1.5 m, 4.9 ft) ···················· 1
Instructions (this leaflet)············································· 1
• Input voltage:
DC 5 V ±5% (supplied through
the PC’s USB port)
• Operating
temperature range:
–10˚C ~ +60˚C,
+14˚F ~ +140˚F
• Weight:
(approximate)
440 g, 15.5 oz
(supplied USB cable is not in-
cluded)
• Dimensions:
(approximate)
64 mm,
2.5 in
64 mm,
2.5 in
116 mm,
4.6 in
SUPPLIED ITEMS
All stated specifications are subject to change without notice
or obligation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
CAUTION:
Changes or modifications to this controller,
not expressly approved by Icom Inc., could void your au-
thority to operate this controller under FCC regulations.
FCC INFORMATION
DISPOSAL
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that in the European Union, all electrical and
electronic products, batteries, and
accumulators (rechargeable batteries) must
be taken to designated collection locations at
the end of their working life. Do not dispose
of these products as unsorted municipal waste. Dispose
of them according to the laws in your area.
Below statement is for UKCA purpose only
United Kingdom Authorised Importer: Icom (UK) Ltd.
Address: Blacksole House, Altira Park, Herne Bay,
Kent, CT6 6GZ, U.K.
The RC-28 complies with the essential
requirements of the 2014/30/EU directive
for Electromagnetic Compatibility and the
2001/95/ EC directive for General Product
Safety.
ABOUT CE
