6
1
ATTACHMENT
■
Attachment (Continued)
D
Attaching the front panel
1. Pass the separation cable’s control connector and
ground wire through the supplied connector O-ring and
cable hole of the front panel from the front side.
L
If you are connecting another separation cable, pass
that cable through the other cable hole.
Front panel
Separation
cable
Ground wire
Control connector
2. Firmly slide the cable bracket in place to lock the cable
inside the front panel.
3. Firmly fasten the ground wire terminal to the front panel
using the supplied grounding screw.
4. Connect the control connector to connector [J4]
.
Cable
bracket
O-ring
[J4]
Ground wire terminal
Important for easy attachment:
•Lift the control connector and ground wire upward.
Lift upward