9
2
DUAL-HEAD OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
This section describes the operations that can be made when two control heads are connected to the transceiver’s main unit.
For the operations and functions that are not mentioned in this section, see the transceiver’s instruction manual.
■
Individual settings
You can individually set the following items in each control
head, and also in the HM-218.
L
See the transceiver’s instruction manual for details on
setting these items.
“Other Head is in use”
Except for the Power key, [VOL], and [Emer] keys, all
keys are locked while one control head is being used, and
“
Other Head is in use
” is displayed as shown below.
The [PTT] button is also locked while [PTT] is being
pushed on the other control head. This means that you
can only transmit from one control head at a time.
Item
Options
Audio level
—
Head SP Out
ON/OFF (See page 11 for details)
Backlight
ON/Auto OFF/OFF
Brightness
0~7
Dimmer
0~7
LCD Mode
Day/Night
NOTE:
Except for the audio level setting, you can only set
the items using one control head at a time. While setting
an item on another control head “
Other Head is in use
” is
displayed.
Other Head
is in use