9
2
SYSTEM SETUP
D
D
dsipsvd.conf screen description
— Communication Port Number —
q
PORT_SEARCH
Sets the port number of the IP address managing
server for call sign inquiry
(UDP)
.
Use the default setting.
w
PORT_RENEWAL
Sets the port number of the IP address managing
server for updated location information request
(UDP)
.
Use the default setting.
— Command In/Out Mode —
e
CMDMODE_STD
Sets the command processing mode.
Use the default setting.
— Backup Param. —
r
FILE_SWEEP_HOLD
Sets the backup file preservation period
(unit: sec-
ond)
.
(default: 86400 sec.)
t
FILE_SWEEP_CHECK
Sets the backup file check interval for the file delet-
ing
(unit: second)
.
(default: 3600 sec.)
y
BACKUPDIR_PATH
Sets the directory for saving the backup file.
The directory “/var/dsipsvd” is the default.
— IP Server comm. Info.—
u
TRUST_SERVER
Sets the IP address of the “TRUST SERVER” to ac-
quire the user information in MNG, GIP and RIP
table when starting up the repeater first time.
i
PORT_SYNC
Sets the port number for the user information in
MNG, GIP and RIP table synchronization.
(TCP)
Use the default setting.
o
SEND_RECV_TIMEOUT
Sets the time-out period for the user information in
MNG, GIP and RIP table synchronization.
Use the default setting.
— My IP Server Info. —
!0
ZR_CALLSIGN
Sets the call sign of the zone repeater.
The same call sign that is programmed in
“ZR_CALLSIGN” in “dsgwd.conf” file should be set.
!1
IPSV_ADDR
Sets the fixed IP address
(global address)
of the IP
server
(the IP address
x
in
D
Setup example)
.
!2
DNS_ZONE_FILE_PATH
Specifies the DNS zone file for D-STAR.
— Named Pid File Name —
!3
NAMED_PID_FILE
Sets the PID
(Process ID)
of the named setting.
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
