112
VE-PG2 SETTING SCREEN
3
3-19 TRX/EXT EXT output (EXT OUT) (Continued)
ï
N������� ������ ���������g
Set the details of the notice tone that is sent to the calling station through the [OUT]
port when you receive a call from the external device that is connected to the [IN]
port of the VE-PG2.
Place the mouse pointer on �Connection setting,�� and then on �TRX/EXT,�� and then
click �EXT Output (EXT OUT)�� shown on the list.
[NOTE]
This setting appears when you select �Combined mode�� in �EXT I/O port�� on
�Operating mode.��
q
C�ll��g �������� ������ ��� EXT Ou���u��
Select the desired notice tone type or �Not use.��
The selected notice tone sounds in the external device while calling.
If �Not use�� is selected, no tone sounds are sent. (Default: Not use)
Selectable from Not use, Notice tone 1, Notice tone 2 or Notice tone 3.
w
S���� ��������� �u������ ������ ��� EXT Ou���u��
Select the desired notice tone type or �Not use.��
The selected notice tone sounds in the external device before the communication
starts.
If �Not use�� is selected, no tone sounds are sent. (Default: Not use)
Selectable from Not use, Notice tone 1, Notice tone 2 or Notice tone 3.
e
D����������� �������� ������ ��� EXT Ou���u��
Select the desired notice tone type or �Not use.��
The selected notice tone sounds in the external device when the connection ends.
If �Not use�� is selected, no tone sounds are sent. (Default: Not use)
Selectable from Not use, Notice tone 1, Notice tone 2 or Notice tone 3.
r
S���� ��������� f��lu��� ������ ��� EXT Ou���u��
Select the desired notice tone type or �Not use.��
The selected notice tone sounds in the external device if the connection fails.
If �Not use�� is selected, no tone sounds are sent. (Default: Not use)
Selectable from Not use, Notice tone 1, Notice tone 2 or Notice tone 3.
t
Ex�� Ou���u�� �������� ������ v�lu���
Set the notice tone volume level.
(Default: 0)
(Select range: –18 to +6 (dB), 1 dB steps)
q
w
■
Connection setting (Selective call mode)
e
r
t