64
VE-PG2 SETTING SCREEN
3
■
Connection setting (Bridge mode)
3-3 IP network connection EXT IN (EXT IN)
ï
IP �����w��k ������������ ������u�
The screen shows the status of the [IN] port’s network connection, and has controls
for the connection.
Place the mouse pointer on �Connection setting,�� and then on �IP network
�Connection setting,�� and then on �IP network
Connection setting,�� and then on �IP network
,�� and then on �IP network
�� and then on �IP network
connection,�� and then click �EXT Input (EXT IN)
and then click �EXT Input (EXT IN)
click �EXT Input (EXT IN)
�EXT Input (EXT IN)
EXT Input (EXT IN)�� shown on the list.
• The [Reload] and [Connect]/[Disconnect] buttons will not selected in the Unicast mode if you
have not set �Connection IP address.��
q
S�����u�
Displays the [IN] port connection status for the IP network.
• The VE-PG2 has 2 statuses (�Not connected�� and �During transmit��).
w
[R��l���]
Click [Reload] to reload and display the current status of the [IN] port.
e
[C��������]/[D�����������]
Connect or disconnect the [IN] port to the IP network.
[NOTE]
• You can confirm the connection status on this screen.
• [VoIP] lights green when the [IN] port is connected to the IP network.
• You can confirm the connection status of the [IN] port by looking at the [EXT] indicator on the
VE-PG2, or by referring to �Information list for IP connection.�� (p. 141)
q
w
e
