72
VE-PG2 SETTING SCREEN
3
■
Connection setting (Bridge mode)
3-6 IP network connection Emergency notice (Continued)
ï
IP network connection setting (Continued)
Place the mouse pointer on �Connection setting,�� and then on �IP network
�Connection setting,�� and then on �IP network
Connection setting,�� and then on �IP network
,�� and then on �IP network
�� and then on �IP network
connection,�� and then click �Emergency notice
and then click �Emergency notice
click �Emergency notice
�Emergency notice�� shown on the list.
• You cannot set these settings when �During transmit�� or �During receive�� is displayed in the
status field of �IP network connection status.��
• The default settings (
q
–
r
) are dependent on �IP communication mode setting.��
w
C����������� ����� �u�b���
Set the destination VE-PG2’s port number.
(Default: Multicast mode:22520, Unicast mode: 21510)
• You can set the port number to between 2 and 65534 (even numbers only).
e
M� ��������� ����� �u�b���
Set the VE-PG2 communication port number.
(Default: Multicast mode:22520, Unicast mode: 21510)
• You can set the port number to between 2 and 65534 (even numbers only).
• DO NOT set the same port number to [TRX1]–[TRX3], [IN] or [OUT].
q
w
e
r