6
CONVERTER MODE SETTING SCREEN
6-30
7. [V/RoIP] Menu (continued)
M
Peer to Peer Common Setting
M
Peer to Peer
Calling from the WAN ………
Select “Allow” to permit to receive the Peer to Peer call from WAN side.
(Default: Inhibit)
Note: When you select “Allow,” you have to enter the destination SIP URI to
the SIP URI item on the “VoIP Phonebook” screen.
q
Index ………………………
Enter the index assigned for the entry.
Setting range:“1” to “100”
w
SIP URI ……………………
Enter the SIP URI up to 63 characters in either format below.
• sip: [SIP username]@[VE-PG3 IP address]
• sip: [SIP username]@[Host name.domain name]
About the [SIP username] part:
Enter an alphabet or number in the [SIP username].
• Use at least one alphabet.
About the [Host name.domain name] part:
• When the VE-PG3 IP address is registered in your party’s Phonebook,
enter the IP address (LAN).
• When the VE-PG3 host name is registered in the dynamic DNS or static IP
address in your party’s Phonebook, enter the specified host name (ex. tel-
ephone) or domain name (ex. icom.co.jp).
[V/RoIP]–[Peer to Peer]
