6
CONVERTER MODE SETTING SCREEN
6-66
9. [Port Settings] Menu (continued)
M
Voice Transmission Control to the Transceiver
The VOX (voice operated transmission) function automatically switches the connected transceiver to transmit,
when the VE-PG3 receives the audio signal through the network.
M
Voice Transmission Control from the Transceiver
q
Attack Time ………………
Enter the attack time in 5 milliseconds step.
(Default: 50)
Range: 5 to 500 milliseconds
It is the delay time before the VOX switch turns ON after an audio signal is
received through the network.
w
Release Time ……………
Select the amount of time before returning to receive in 5 milliseconds step.
(Default: 500)
Range: 5 to 2000 milliseconds
It is the delay time for the VOX switch to turn OFF after no audio signal is
received through the network.
e
Voice Delay ………………
Select the amount of time to store the audio from the network in 5
milliseconds step.
(Default: 200)
Range: 0 to 500 milliseconds
The VE-PG3 stores the audio from the network for the specified time of peri-
od to prevent the beginnings of phrases are clipped.
r
Voice Threshold …………
Set the voice threshold level.
(Default: 40)
Range: 0 to 100 %
The VOX function automatically switches between receive and transmit
according to this threshold level.
Lower values make the VOX function more sensitive to the audio signal.
*Appears only when “VOX” is selected in [Audio Transmission Methods to the Transceiver].
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Attack Time …………………
Select the attack time.
(Default: 1000)
Range: 0, 200, 400, 600, 800 and 1000 milliseconds
