6
CONVERTER MODE SETTING SCREEN
6-67
9. [Port Settings] Menu (continued)
M
Voice Reception Control from the Transceiver
Configure the settings for received audio detection conditions. The VE-PG3 detects that the connected transceiver
is receiving signal or not, according to these settings.
q
Attack Time ………………
Enter the RX attack time in 5 milliseconds step.
(Default: 1000)
Range: 5 to 500 milliseconds
It is the delay time before the VE-PG3 output the audio signal to the network.
w
Release Time ……………
Select the amount of time before detecting the audio absence in 5
milliseconds step.
(Default: 200)
Range: 5 to 2000 milliseconds
It is the delay time for the VE-PG3 to output the control signal to the network,
which informs that the audio signal is no longer received.
e
Voice Delay ………………
Select the amount of time to store the audio from transceiver in 5 milliseconds
step.
(Default: 5)
Range: 0 to 500 milliseconds
The VE-PG3 stores the received audio from the transceiver for the specified
time of period to prevent the beginnings of phrases are clipped.
r
Voice Threshold …………
Set the voice threshold level.
(Default: 70)
Range: 0 to 100 %
The audio signal from the transceiver is output to the network according to
this threshold level.
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
