6
TRANSCEIvER CoNTRoLLER
6-32
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■
Transceiver Settings
19
Fix Call Destination ���
Select whether or not the IP100H uses the Fix Call Destination function.
(Default: Disable)
When this setting is set to other than “Disable,” the IP100H calls the
preset destination instead of the selected destination that is displayed
on the third line. The Fix Call Destination function separates the fixed
call from the general calls by the specified method to start transmission.
•
Disable
The Fix Call Destination is not specified, and the IP100H calls the
selected destination.
•
PTT
The Fix Call Destination is specified as PTT transmission.
When [PTT] is held down, the IP100H calls the preset destination.
(Example: All call is specified to the PTT)
•
Earphone Mic or Headset
The Fix Call Destination is specified as the external Mic transmission.
When the external microphone’s PTT switch is held down, or its voX
function is active, the IP100H calls the preset destination.
(Example: Group call is specified to the Earphone Mic or Headset)
All
Sales8
Call type is set to All
3rd line
2nd line
Seles group1
Sales8
Call type is set to Group
3rd line
2nd line
1/24 16:57
Sales8
Information
L
•
Set the Call type to “Individual,” “Group,” or “All.”
•
When the “Call Type” is set to “Individual” or “Group,” enter the 4 digit number
of the Individual ID or Group ID in the [Destination ID].
•
The Destination ID, Name (if [Name] is selected in the [Display Item] (
2
)) or
Call type of the Fix Call Destination is displayed on the 2nd line.
(Usually Date and Time or Own Name is displayed on the 2nd line.)
•When the IP100H receives a call with this setting, it does not display the
Caller’s ID or Call type on the 3rd line.
•
When both of the IP100H’s [PTT] and external microphone’s PTT switch are
held down, the external PTT has priority and the internal microphone will be
muted.
19
20
21
22
