7
CONNECTION PORT SETTINgS
7-6
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■
Digital Transceiver Connection
System: NXDN-Trunking
7
System Code
Displays the System Code that is set in the UC-FR5000.
8
Prefix ID
Enter the Prefix ID (for NXDN Trunking) that is set in the UC-FR5000.
(Default: 1)
• Range: 1 ~ 30
9
Unit ID
Enter the Unit ID that are set in the UC-FR5000.
(Default: 1)
• Range: 1 ~ 2000
10
Prefix ID
Enter the Prefix ID (for NXDN Trunking) that is set in the UC-FR5000.
(Default: 1)
• Range: 1 ~ 30
11
Talkgroup ID
Enter a Talkgroup ID.
(Default: 1)
• Range: 1 ~ 2000
12
Encryption
Select whether or not to enable the Encryption function. (Default: Disable)
When you enable the function, enter an encryption key between 1 and
32767.
(Default: 1)
13
Connection Status
Click to connect or disconnect the transceiver, or to refresh the
connection status.
L
The buttons are grayed out when Connected Repeater’s Address is blank.
L
The settings cannot be changed while connection is established. Click
<Disconnect> before changing the settings on this screen.
1
2
3
4
5
6
7
8
9
10
11
12
13
L
The above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to the Digital
Transceiver 1 (D-TRX1).
L
The above screen shows when the Encryption is set to “Enable.”
