7
CONNECTION PORT SETTINgS
7-26
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■
Transceiver Connection
Transceiver Model: general Setting
These items are displayed when “Transceiver” is selected as a connected unit.
(Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port)
25
Server Address
Enter a destination RoIP gateway’s IP address.
26
Server Port Number
Enter a destination RoIP gateway’s port number between 1024 and
65535.
(Default: EXT1=50000, EXT2=50001, EXT3=50002, EXT4=50003)
27
Baud Rate
Select the serial communication baud rate between a device and the
RoIP gateway.
(Default: 9600)
28
Data Bits
Select the number of bits for serial communication.
(Default: 8)
29
Parity
Select the parity bit.
(Default: none)
30
Stop Bits
Select the stop bit length.
(Default: 1)
31
Flow Control
Select the Flow control option.
(Default: None)
32
Connection Status
Click to connect or disconnect the transceiver, or to refresh the
connection status.
L
The buttons are grayed out when Connected Repeater’s Address is blank.
L
The settings cannot be changed while connection is established. Click
<Disconnect> before changing the settings on this screen.
33
Session Timer
Set the time to cut the TCP session when there is no communication
from the host.
(Default: 30)
