13
PBX EXTEnSIon
13-52
Transceiver Controller Telephone Connection screen
PBX Extension > Transceiver Controller Telephone Connection
■
Control
PTT Control Type
Sets the type of signal that SIP phones use to communicate for each call type or destination device type.
•options: VoX (Voice signal,) DTMF (Tone signal,) or Constant Transmission during Call
L
When “Constant Transmission during Call” is selected, the no Voice Release Timer detects the communication
status only by the signal received from the specified destination.
(PBX Extension > Transceiver Controller Telephone Connection > Release Timer)
If a signal from the specified destination is not received for the set period of time, the call may be terminated
because of the no Vice Release Timer function.
11
Group Call/ All Call ���
Set the signal type for Group Calls and All Calls to the linked
transceivers.
(Default: VoX)
•
VOX
:
When a voice signal is received from a SIP phone, the target
transceiver enters the transmit mode.
•
DTMF
: When a tone signal is received from a SIP phone, the target
transceiver enters the transmit mode.
•
Constant Transmission during Call
:
As soon as the communication is established, the target transceiver
enters the transmit mode.
The no Voice Release Timer detects only the signal (VoX or RTP)
received from the Converter Bridge connection destination.
12
Individual Call to a
Wireless LAN Transceiver
Set the signal type for Individual calls to Wireless LAn transceivers.
(Default: VoX)
•
VOX
:
When detecting a voice signal from a SIP phone, the target
Wireless LAn transceiver enters the
receive
mode.
•
DTMF
: When detecting a tone signal from a SIP phone, the target Wireless
LAn transceiver enters the
receive
mode.
•
Constant Transmission during Call
:
As soon as the communication is established, the target Wireless
LAn transceiver enters the
receive
mode.
The no Voice Release Timer detects only the signal (VoX or RTP)
received from the Wireless LAn transceiver.
20
L
“PTT-on Tone” (
18
) and “PTT-oFF Tone” (
19
) are displayed only when any PTT Control Types from
“Group Call/All Call” (
11
) to “Individual Call to a Microphone” (
17
) are set to “DTMF.”
11
12
13
14
15
16
17
18
19
