13
PBX EXTEnSIon
13-68
Converter Bridge screen
PBX Extension > Converter Bridge
■
Control
14
PTT-OFF Tone ������
Select the PTT-oFF tone when the PTT Control Tone (
12
) is set to
“DTMF.”
(Default: 0)
• Range: 0 ~ 9, *, or #
L
Dial this tone on the SIP phone to make the destination device stop
transmitting.
L
If you enter the same value to both the PTT-on Tone and PTT-oFF Tone,
you can toggle the destination device status by dialing this number.
15
Method ���������
Set the transmitting trigger to make a call from a bridge to the IP
telephone system.
(Default: RTP)
•
VOX
: Starts dialing when the VoX detects voice data in the voice packet
that is received by the bridge interface through RTP (Real-time
Transport Protocol).
•
RTP
: Starts dialing when RTP (voice data packet) is received later than the
set period time in the Attack Time setting, regardless of if the RTP
includes voice data or not.
12
13
14
15
L
“PTT-on Tone” (
13
) and “PTT-oFF Tone” (
14
) are displayed only when “PTT Control Type” (
12
) is set to
“DTMF.”
