13
PBX EXTEnSIon
13-71
Converter Bridge screen
PBX Extension > Converter Bridge
■
Call Initiation Setting
The VoX (voice operated transmission) function automatically switches the connected transceiver to receive,
when the RoIP gateway receives the audio signal from the bridge connection destination device.
1
Attack Time ������
Enter the TX attack time. It is the delay time before the VoX switch
turns on after an audio signal is received through the network.
(Default: 1000)
• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps
2
Release Time ������
Select the RX delay time in 5 millisecond step. It is the delay time for
the VoX switch to turn oFF after no audio signal is received through
the network.
(Default: 200)
• Range: 5 to 2000 (milliseconds) in 5 millisecond steps
3
Voice Delay �������
Set the audio signal buffer time to prevent intermittent audio.
(Default: 5)
• Range: 0 ~ 500 (milliseconds) in 5 millisecond steps
4
VOX Threshold �����
Set the voice threshold level. The audio signal is output to the network
according to this threshold level.
(Default: 70)
• Range: 0 ~ 100 (%)
L
The lower values make the VoX function more sensitive to the voice input.
1
2
3
4
