15
MANAGEMENT
15-14
SNMP screen
■
SNMP
Configure the SNMP function, that is information on the RoIP Gateway for being collected by each host in the
IP network for their network management.
Management > SNMP
1
2
3
4
5
6
1
SNMP����������
Select “Enable” to manage the setting information in the SNMP
management tool.
(Default: Enable)
2
Community Name (GET) �
Enter the Community name to get the SNMP community string. (Up to
31 characters)
(Default: public)
3
System Location ����
Enter the SNMP system location. (Up to 127 characters)
4
System Contact �����
Enter the SNMP system contact. (Up to 127 characters)
5
<Apply> ��������
Click to apply the entries.
6
<Reset> ��������
Click to reset the settings.
L
You cannot reset after clicking <Apply>.
