6
TRANSCEIvER CoNTRoLLER
6-23
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■
Transceiver Settings
(Address) key
7
Use ID List �������
Select whether or not the IP100H uses the ID list.
(Default: Disable)
•
Disable:
The call type is fixed to that which is selected in the [Call Type], as
shown below, even if you push the [ ] key on the IP100H.
L
If you set the Call Type to “Individual” or “Group,” enter the 4 digit
destination ID in the [Destination ID].
(Default: All)
L
Even if “Disable” is selected, the IP100H displays a received ID in the ID list.
•
Enable:
The call type is changed by pushing the [ ] key on the IP100H.
Select First Call ID from All, or an ID number (1 to 50) that is
displayed when the IP100H is turned ON, in [Call type].
L
The ID list is selected on the [Common Setting] screen.
1
2
3
4
5
7
8
9
6
