9
ExPERT SETTINGS
9-5
Abnormal Condition Monitoring screen
Expert Settings > Abnormal Condition Monitoring
■
SIP Server Registration
Set the monitor function for the communication error.
2
1
1
Monitoring �������
Select whether or not to detect the SIP server connection error. When
the error is detected, the error is displayed on the “SYSLOG” screen.
(Information > SYSLOG >SYSLOG)
(Default: Disable)
L
The [VoIP] indicator works regardless of this setting.
2
Control Output
�����
Displayed only when Monitoring (
1
) is set to “Enable.”
Select whether or not to short the B1/B2 terminal (+/–) to output an
error detect signal.
(Default: Disable)
L
Confirm the Relay Circuit is selected.
( Connection Port Settings > ExT I/O (ExT) > ExT Output Settings >
Switching Control)
3
<Apply>
��������
Click to apply the settings.
4
<Reset>
��������
Click to reset the settings.
L
You cannot reset after clicking <Apply>.
3
4
