4
RouTER SETTINGS
4-17
IP Filter screen
■
IP Filter
The settings to pass or block the packets that match the registered filtering settings.
L
When [LAN Port] is set in Connection type, this setting cannot be changed.
L
Icom is not responsible for any results caused by a decline in security due to changing the IP filter.
Router Settings > IP Filter
1
No. �����������
Select the filtering order.
• Range: 1 ~ 64
(Default: 1)
L
The number registered in [List of IP Filter Entries] cannot be selected.
The filter function checks the packets in the selected order according to
the filter setting in [list of IP Filter Entries].
2
Entry ����������
Select “Enable” to apply the filter setting.
(Default: Enable)
Select “Disable” in the unused filter entry.
If the filter is registered in “Disable,” (oFF) is displayed in [No.] of [
List of
IP Filter Entries
].
L
This is an example when number “1” is disabled.
3
Action ���������
Select the filtering method.
(Default: Pass)
•
Block:
Blocks all packets that match the filtering settings.
•
Pass:
Passes all packets that match the filtering settings.
1
2
3
4
5
6
7
8
9
10
11
12
13
L
This is an example of setting “TCP” as the protocol.
