Take out the cup holder lower assembly from the accessory bag, aim the cup holder lower assembly to
the screw hole of the cup holder upper assembly, twist 3 ST2.9*10 self-tapping screw tightly and make
sure both are installed well (Figure 7). Find the M4*10 thread hole under the tea-tray, twist the M4*10
screw tightly by using the cross screwdriver in the accessory bag. Shake the beverage tray by hand
slightly to see if it is installed tightly (Figure 8).
Fig. 7
Fig. 8
Final Installation
1) Insert the AC power cord into the massage chair power socket and then into the wall AC
outlet.
2) Turn on the main power switch at the bottom, behind the massage chair.
7. COMPONENTS
1.Neck pillow pad
2.Control panel
3.Beverage tray
4.Seat cushion
5.Footrest frame
6.Front cover
7.Bluetooth® activated speakers.
8.Backrest cushion
9.Armrest
10.Backrest cover
11.Wireless phone charger*
12.Cup holder
13.Side pocket
14.AC Power cord
15.Carrying wheels
16.AC Power cord socket
17.Main activation switch
18.Fuse box
