Page 10
7 Specification & Features
(Typical conditions @ 230/120v? 50/60Hz)
2v Audio Output for full modulation
192 kHz 24 bit DAC
1x ECC82/12AU7 double triode analogue output
Burr Brown chipset
Frequency Response: 20Hz-20kHz
（±
0.5dB
）
Signal to noise ratio:
≥
105dB
（
A Weighted
）
Distortion
：≤
0.005%
（
1kHz NORMAL
）
Digital Output
：
coaxial
Dynamic Range
：≥
110dB
2 separate power supplies for digital circuit
Hand inserted components
Ceramic valve base for low noise/leakage
High quality metal film resistors
Audiophile polypropylene audio caps
Optional upgrade to Jensen Copper foil capacitors
Valves carefully matched for best performance
Gold plated output terminals
220/240volts, 40watts
W:41cm. D:35cm. H:11cm 9KG
(allow for connections)
Shipping Info W:50cm D:47 H:23 12kg (0.058m
2
)
IEC mains lead, (5amp fused)
CE certified. ROHS & WEEE compliant
Specification subject to change without notice.
Malfunction and anomalies check points
Many malfunctions are caused by some simple operational mistakes. Thus some common malfunctions
can be eliminated on your own as per following instructions. If malfunctions still exist after examination,
please contact your dealer or Icon Audio.
ATTENTION
1. The machine should be placed in a ventilated and dry environment.
2. When cleaning, unplug the power socket to prevent electric shock.
3. Please use the machine within the specified voltage range.
4. No user replaceable parts inside refer to professional Engineer.
