background image

Page 7 

 

SAFETY PRECAUTIONS 

 

WARNING 

 

To prevent electric shock when making adjustments. Switch off 
the power supply, and remove the plug from the AC socket. 
Refer to your dealer or Icon Audio for maintenance and service.

 

 
 
 
 

Do not put anything containing water on the top of this machine 

This will damage the player if it gets inside. 
 
 
 
 

Do not let any foreign objects drop into the machine  

If any metal or inflammable liquid articles get inside through the 
cover may cause fire or electric shock. 
 
 
 
 

Do not cover the CD Player 

 

Allow ventilation around the CD Player and keep away from 
flammable material. 
 
 
 
 

Do not disassemble the machine

 

No user serviceable parts inside, Refer to Icon Audio or a suitable 
service agent. (If replacing the valve, refer to section 6) 
 
 
 

Connecting power line

 

Insert the IEC plug firmly. Avoid using multi-sockets if possible. 

 
 
 
 

Volume adjustment 

Beware of adjusting the volume level too high. Because of the low noise and high dynamic 
range of the CDX2 player, a change in recording level may overload the amplifier and or 
speakers causing damage. We suggest you adjust the maximum volume carefully. 

 

Moving and Placement

 

Do not put this machine on uneven place, like shelf. 
Be sure to switch off the power and pull out the plug before moving. 

 Specifications and external appearance are subject to change without notice as a result of product improvement. 

Summary of Contents for CDX 2












Reviews: