ICON Health & Fitness FREEMOTION 730, User Manual

21

THE INFORMATION MODE

The console features an information mode that keeps 

track of treadmill information and allows you to person-

alize console settings.

To select the information mode, hold down the Stop 

button while inserting the key into the console, and 

then release the Stop button. When the information 

mode is selected, the following information will be 

shown:

The Time display will show 

the total number of hours 

the treadmill has been 

used.

The Distance display will 

show the total number of 

miles or kilometers that the 

walking belt has moved.

While the information mode is selected, press the 

Incline workouts button to select each of the fol-

lowing screens in the center display:

1.  

UNITS: To change 

the unit of measure-

ment, press the Manual 

Control button. To view 

distance in miles, select 

ENGLISH. To view 

distance in kilometers, 

select METRIC.

2.  

DEMO MODE: The console features a display 

demo mode, designed to be used if the treadmill 

is displayed in a store. While the demo mode is 

turned on, the console will function normally when 

you plug in the power cord, press the power switch 

into the reset position, and insert the key into the 

console. However, when you remove the key, the 

displays will remain lit, although the buttons will not 

function. If the demo mode is turned on, the word 

ON will appear in the center display. To turn on or 

turn off the demo mode, press the Manual Control 

button.

3.  

CONTRAST LVL: Press the Incline increase and 

decrease buttons to adjust the contrast level of the 

displays.

If a module is connected, you may also select the 

following screens:

4.  

MODULE: If an iFit Live module is connected, the 

display will show the word WIFI. If a USB module is 

connected, the display will show the word USB/SD. 

5.    AUDIO COACH: To turn on or turn off the audio 

coach, press the Manual Control button.

If an iFit Live module is connected, you may also 

select the following screens:

6.  

START MODE: The start mode will appear when 

you insert the key into the console. Press the 

Manual Control button to select the manual mode 

or the iFit Live mode as the start mode.

7.  

CHECK WIFI: Press the Manual Control button. 

The center display will show the software version 

number, the network SSID, the network encryption 

type, the wireless signal strength, the IP address 

of the module, the number of registered users and 

their names, and the results of the DNS lookup. 

To return to the information mode, remove the key 

from the console and repeat the instructions near 

the beginning of this page.

8.  

SEND/OBTAIN DATA: To send and receive work-

outs, workout logs, and updates, press the Manual 

Control button. When the process is finished, the 

words TRANSFERS DONE will appear in the 

display.

To exit the information mode, remove the key from the 

console.