16
14. Identify the #8 x 3/4" Truss Head Screws (24).
IMPORTANT: Do not confuse the #8 x 3/4"
Truss Head Screws with the #8 x 3/4" Screws
(5). The #8 x 3/4" Truss Head Screws have
flatter heads.
Set the Left Handrail Top Cover (73) on the left
Handrail (74). Start four #8 x 3/4" Truss Head
Screws (24) into the Left Handrail Bottom Cover
(75), the left Handrail, and the Left Handrail Top
Cover. Slide the Left Handrail Top and Bottom
Covers forward against the console assembly
(I) as shown. Then, tighten all four Truss Head
Screws.
Attach the Right Handrail Top and Bottom
Covers (81, 82) to the right Handrail (74) in
the same way.
24
24
24
24
14
82
74
75
74
81
73
I
93
56
16
52
9
N
15
15. Raise the Frame (52) to the position shown.
Have a second person hold the Frame until
step 16 is completed.
Remove the 5/16" Nut (9) and the 5/16" x 1 3/4"
Screw (16) from the bracket on the Base (93).
Next, orient the Storage Latch (56) as shown.
Attach the lower end of the Storage Latch (56)
to the bracket on the Base (93) with the 5/16" x
1 3/4" Screw (16) and the 5/16" Nut (9).
Then, raise the Storage Latch (56) to a vertical
position, and remove the tie (N).