13
12. Attach the Small Console Cover (27) with two
#8 x 3/4" Screws (2); do not overtighten the
Screws. Note: Use the outer two holes in the
underside of the console base assembly (G).
12
27
2
2
I
13
2
2
8
G
13. Tighten the two 5/16" x 3/4" Screws (8) (only one
side is shown).
Then, tighten four #8 x 3/4" Screws (2) into the
handrail assemblies (I) in the locations shown
(only one side is shown); do not overtighten
the Screws.
I
14
14
26
Q
28
P
L
14. Firmly tighten the two 5/16" x 2 1/2" Screws (28)
on each side of the handrail assembly.
Next, identify the Right Handrail Cover (26).
Insert the tab (P) on the Right Handrail Cover
into the right handrail assembly (I) in the loca-
tion shown. Then, press the Right Handrail
Cover onto the console assembly (L). The Right
Handrail Cover should snap into the indicated
hole (Q).
Then, attach the Right Handrail Cover (26) with
a #8 x 1" Screw (14); do not overtighten the
Screw.
Attach the Left Handrail Cover (not shown)
as described above.
