11
4
63
62
25
94
13
13
90
7
13
5.
Remove and save the four 5/16" x 3/4"
Screws (4).
Identify the Left and Right Base Covers (82, 83).
Slide the Left Base Cover onto the Left Upright
(89), and slide the Right Base Cover onto the
Right Upright (90).
Do not press the Base
Covers into place yet.
82
90
83
5
89
81
4. Hold the Right Upright (90) against the Base
(94).
Make sure not to pinch the Upright Wire
(81).
Attach the Right Upright (90) and the Wheel (25)
with two 3/8" x 2 1/4" Screws (7), a 3/8" x 1 1/4"
Screw (63), a 3/8" x 1 3/4" Screw (62), and four
3/8" Star Washers (13) as shown;
do not fully
tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way.
Note: There are no wires on the left
side.
4
4
