7
2. Insert the end of the Upright Wire (111) through
the looped plastic ties at the top of the Upright
(81).
Make sure that the Upright Wire is be-
hind the crossbars on the Upright.
Then, gen-
tly pull upward on the Upright Wire as you
tighten the plastic tie around the Upright Wire.
111
2
1.
Make sure that
the Power Cord
(70) is unplugged.
Be careful not to
pinch the Power
Cord.
Slide the Upright Cover (not shown) off the
Upright (81).
Orient the Upright (81) and the plastic ties as
shown. Set the Upright on the tabs on the
Frame (53). Attach the Upright to the Frame with
four 3/8" x 3 1/4" Patch Bolts (1) and four 3/8"
Star Washers (2).
Start all four Patch Bolts
before tightening any of them. Be careful not
to pinch the Upright Wire (111).
81
53
1
1
2
2
Plastic Ties
81
Plastic Ties
Crossbar
Crossbar
Crossbar
1
!
70
111
All manuals and user guides at all-guides.com
