16
16. Identify the Right Base Cover (98). Slide the
Right Base Cover under the Belly Pan Wire (80)
and onto the Upright Base (101). Make sure
that the Right Base Cover is under the Belly
Pan Wire.
Repeat this step on the left side of the tread-
mill with the Left Base Cover (not shown).
Note: There is not a wire on the left side.
16
80
98
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see page 32). Note: Extra hardware may be
included.
101
