20
HOW TO TURN ON THE POWER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do
not do this, you may damage the console or other
electrical components.
Plug in the power cord (see
HOW TO PLUG IN THE POWER
CORD on page 16). Next,
locate the power switch on the
frame near the power cord.
Press the power switch to the
reset position (A).
The console will then turn on and be ready for use.
Note: When you turn on the power for the fi rst time,
the incline system may calibrate automatically.
The
ramp will move upward and downward as it calibrates.
When the ramp stops moving, the incline system is
calibrated.
IMPORTANT: If the incline system does not
calibrate automatically, see step 6 on page 20
and manually calibrate the incline system.
HOW TO USE THE TOUCH SCREEN
The console features a tablet with a full-color touch
screen. The following information will help you use the
touch screen:
• The console functions similarly to other tablets. You
can slide or flick your finger against the screen to
move certain images on the screen, such as the
displays in a workout.
• To type information into a text box, first touch the text
box to view the keyboard. To use numbers or other
characters on the keyboard, touch
?123
. To view
more characters, touch
~[<
. Touch
?123
again to
return to the number keyboard. To return to the letter
keyboard, touch
ABC
. To use a capital character,
touch the shift button (upward-facing arrow symbol).
To use multiple capital characters, touch the shift
button again. To return to the lowercase keyboard,
touch the shift button a third time. To clear the last
character, touch the clear button (backward-facing
arrow with an X symbol).
HOW TO SET UP THE CONSOLE
Before you use the elliptical for the first time, set up the
console.
1.
Connect to your wireless network.
To use iFit workouts and to use several other
features of the console, the console must be con-
nected to a wireless network. Follow the prompts
on the screen to connect the console to your wire-
less network.
2.
Customize settings.
Follow the prompts on the screen to set the desired
unit of measurement and your time zone.
Note: To change these settings later, see HOW TO
CHANGE CONSOLE SETTINGS on page 28.
3.
Log into or create an iFit account.
Follow the prompts on the screen to log into your
iFit account or to create an iFit account.
4.
Tour the console.
The first time you use the console, a tour
presentation will guide you through the features of
the console.
5.
Check for firmware updates.
First, touch the menu button (three horizontal lines
symbol), touch
Settings
, touch
Maintenance
, and
then touch
Update
. The console will check for firm-
ware updates. See HOW TO CHANGE CONSOLE
SETTINGS on page 28.
6.
Calibrate the incline system.
First, touch the menu button (three horizontal lines
symbol),touch
Settings
, touch
Maintenance
, and
then touch
Calibrate Incline
. The ramp will rise
and lower as it calibrates. For more information,
see HOW TO CHANGE CONSOLE SETTINGS on
page 28.
A
