background image

23

HOW TO USE THE SLED PUSH FEATURE

 1.  

Insert the key into the console. 

 

 See HOW TO TURN ON THE POWER on 
page 17.

 2.  Select the main menu.

 

See step 2 on page 19.

3.  

Start the walking belt and adjust the speed to 
1 mph. Then, adjust the incline to 0%.

 

 See steps 3 and 4 on page 19. 

IMPORTANT: Do 

not use the sled push feature when the tread-
mill is turned off or when the speed setting is 
higher than 1 mph. Do not use the sled push 
feature when the incline setting is higher or 
lower than 0%.

4.  

Grip the push bar or the sled grips with both 
hands (see page 7).

5.  

Use your body to manually move the walking 
belt at the desired speed.

HOW TO USE THE WORKOUT SETTINGS SECTION

 1.  Select the settings main menu.

 

 Insert the key into the console (see HOW TO 
TURN ON THE POWER on page 17). Next, 
select the main menu (see step 2 on page 19). 
Then, touch your name in the upper-left corner of 
the screen, and touch the gears button to select the 
settings main menu. 

 2.  Select the workout section.

 

 In the settings main menu, scroll to the Workout 
section.

 3. Customize 

settings.

 

 To customize settings, touch the desired category, 
and then use the toggle buttons to the side of the 
category name. 

4.  Exit the workout section.

 

 To exit the workout section, touch the back button 
on the screen.

HOW TO USE THE EQUIPMENT SETTINGS 
SECTION

1.  Select the settings main menu.

 

 Insert the key into the console (see HOW TO 
TURN ON THE POWER on page 17). Next, 
select the main menu (see step 2 on page 19). 
Then, touch your name in the upper-left corner of 
the screen, and touch the gears button to select the 
settings main menu. 

2.  Select the equipment settings section.

 

 In the settings main menu, scroll to the Equipment 
Settings section. Note: Slide or flick the screen to 
scroll up or down through the options if necessary.

 3.  

Customize the unit of measurement and other 
settings.

 

 To customize the unit of measurement, timezone, 
or other settings, touch the desired category, and 
then use the toggle buttons to the side of the cat-
egory name. 

4.  View machine information.

 

 Touch the Machine Info button to view information 
about your incline trainer. After you view the infor-
mation, touch the back button on the screen.

5.  Exit the equipment settings section.

 

 

To exit the equipment settings section, touch the 
back button on the screen.

Summary of Contents for NordicTrack Commercial X11i









































Reviews: