ICON Health & Fitness NordicTrack E 300, User Manual

14

 Press the Home button to exit the workout and return to the 

main menu. If necessary, press the Home button again.

   Press the End/Summary button to end the workout 

and view a workout summary. The workout summary 

will appear in the displays for several seconds.

   Change the volume level of the 

console by pressing the volume 

increase and decrease buttons.

5.   Wear a heart rate monitor 

and measure your heart rate if desired. 

   You can measure your heart rate using an optional 

chest heart rate monitor (see page <?> for informa-

tion about the optional chest heart rate monitor)

.

Note: The console is compatible with BLUETOOTH

®

Smart heart rate monitors.

   To connect a heart rate monitor to the console, see 

HOW TO CONNECT YOUR HEART RATE MONITOR 

TO THE CONSOLE on page <?>. 

 When a heart rate monitor is connected to the console, 

your heart rate will be shown in the display. 

6.   Turn on the fan if desired.

   The fan has several speed set-

tings. Press the fan increase and 

decrease buttons repeatedly to 

select a fan speed or to turn off 

the fan. 

7.   When you are finished exercising, the console will 

turn off automatically.

 If the pedals do not move for several seconds, the con-

sole will pause and the time will flash in the display. To 

resume your workout, simply resume pedaling. 

   If the pedals do not move for several minutes and the 

buttons are not pressed, the console will turn off and 

the display will be reset.

HOW TO USE AN ONBOARD WORKOUT

1.   Begin pedaling or press any button on the console 

to turn on the console.

   When you turn on the console, the display will turn on. 

The console will then be ready for use.

2.   Select an onboard workout.

 To select an onboard workout, press the Calorie button 

or the Performance button repeatedly until the desired 

workout appears in the display.

   When you select an onboard workout, the display will 

show the name of the workout and the duration of the 

workout or the number of calories to be burned. 

   The maximum speed and the maximum resistance 

level for the workout will also appear in the display. 

3.   Begin pedaling to start the workout.

   Each workout is divided into one-minute segments. 

One resistance level and one target speed are 

programmed for each segment. Note: The same resis-

tance level and/or target speed may be programmed 

for consecutive segments. 

   If a different resistance level is programmed for the 

next segment, the resistance level will appear in the 

display for a few seconds to alert you. The resistance 

of the pedals will then change.