9
8
7
7. Identify the Right Upper Body Arm (61), which
is marked with a “Right” sticker, and orient it as
shown.
Slide the Right Upper Body Arm (61) onto the
Right Upper Body Leg (60).
Attach the Right Upper Body Arm (61) with
two M8 x 38mm Button Bolts (96) and two M8
Locknuts (102).
Make sure that the Locknuts
are in the hexagonal holes.
Repeat this step for the Left Upper Body Arm
(47).
Hexagonal
Holes
60
61
7
4
47
63
145
110
96
8. Untie and discard the wire tie on the Upper Wire
(110).
While a second person holds the Console
(7) near the Upright (4), connect the wires on
the Console to the Upper Wire (110), to the
Extension Wire (145), and to the Sensor
Wires (63).
Insert the excess wire into the Upright (4) or into
the Console (7).
102