background image

19

HOW TO USE A PRESET WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 16.

2. Select a preset workout.

To select a preset workout, press the Aerobic

Fitness button, the Performance button, or the

Weight Loss button.

When a preset workout

is selected, the displays

will show the duration of

the workout, the maxi-

mum incline setting, the

workout number, and

the maximum speed setting of the workout. In addi-

tion, a profile of the speed settings of the workout

will scroll across the matrix.

3. Enter your weight.

For the most accurate calorie count, enter your

weight by pressing the Rate/Wt. increase and de-

crease buttons repeatedly. Note: Once you have

entered your weight, it will be saved in memory.

4. Start the walking belt.

Press the Start button to start the workout. A mo-

ment after you press the button, the treadmill will

automatically adjust to the first speed and incline

settings of the workout. Hold the handrails and

begin walking.

Each workout is divided into one-minute segments.

One speed setting and one incline setting are pro-

grammed for each segment. Note: The same

speed and/or incline setting may be programmed

for consecutive segments.

During the workout, the

profile will show your

progress. The flashing

segment of the profile

represents the current segment of the workout.

The height of the flashing segment indicates the

speed setting for the current segment. At the end

of each segment, a series of tones will sound and

the next segment of the profile will begin to flash. If

a new speed or incline setting is programmed for

the next segment, the new speed or incline setting

will appear in the displays for a few seconds.

If the speed or incline setting is too high or too low

at any time during the workout, you can manually

override the setting by pressing the speed or in-

cline buttons;

however, when the next segment

of the workout begins, the treadmill will auto-

matically adjust to the speed and incline set-

tings for the next segment.

To stop the workout at any time, press the Stop

button. To restart the workout, press the Start but-

ton or the Speed increase button. The walking belt

will begin to move at 1 mph. When the next seg-

ment of the workout begins, the treadmill will auto-

matically adjust to the speed and incline settings

for the next segment.

The workout will continue in this way until the last

segment of the workout ends. The walking belt will

then slow to a stop.

5. Follow your progress with the displays.

See step 5 on page 17.

6. Measure your heart rate if desired.

See step 6 on page 17.

7. Turn on the fan if desired.

See step 7 on page 17.

8. When you are finished exercising, remove the

key from the console.

See step 8 on page 17.

Current Segment

Summary of Contents for NordicTrack Elite 9500 PRO













































Reviews: