background image

Part No. 421073 R1220A 

Printed in China © 2020 ICON Health & Fitness, Inc.

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to 
provide the following information when contacting us:

•   the model number and serial number of the product (see the front cover of this manual)

•   the name of the product (see the front cover of this manual)

•   the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING 

near the end of this manual)

ORDERING REPLACEMENT PARTS

ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and 
material, under normal use and service conditions. The frame is warranted for ten (10) years from the date 
of purchase. Parts are warranted for two (2) years from the date of purchase. Labor is warranted for one 
(1) year from the date of purchase.

This warranty extends only to the original purchaser (customer) and is not transferrable. ICON’s obliga-
tion under this warranty is limited to repairing or replacing, at ICON’s option, the product through one of 
its authorized service providers. All repairs for which warranty claims are made must be preauthorized by 
ICON. If replacement parts are shipped while the product is under warranty, the customer will be respon-
sible for a minimal handling charge. For in-home service, the customer may be responsible for a minimal 
trip charge. This warranty does not extend to freight damage to the product. This warranty will automati-
cally be voided by the following conditions: (1) if the product is used as a store display model, (2) if the 
product is purchased or transported outside the USA, (3) if all instructions and warnings in this manual are 
not followed, (4) if the product is abused or improperly or abnormally used, or (5) if the product is used for 
commercial or rental purposes. No other warranty beyond that specifi cally set forth above is authorized 
by ICON.

ICON is not responsible or liable for the following damages: (1) indirect, special, or consequential dam-
ages arising out of or in connection with the use or performance of the product; (2) damages with respect 
to any economic loss, loss of property, loss of revenues or profi ts, loss of enjoyment or use, or costs of 
removal or installation; or (3) other consequential damages of any kind. Some states do not allow the 
exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not 
apply to the customer.

The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of 
merchantability or fi tness for a particular purpose are limited in their scope and duration to the terms set 
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the 
above limitation may not apply to the customer. This warranty provides specifi c legal rights; the customer 
may have other rights that vary from state to state.

For warranty service, please call the telephone number on the front cover of this manual. Please be pre-
pared to provide the model number and serial number of the product (see the front cover of this manual).

ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813

LIMITED WARRANTY

IMPORTANT: To protect your fitness equipment with an extended service plan, see page 5.

Summary of Contents for NordicTrack Freestride Trainer FS14i





































Reviews: