9
3. Attach the Left Upright (62) to the Base (69) with
two 3/8" x 2 1/4" Screws (1) and two 3/8" Star
Washers (2);
do not fully tighten the Screws
yet. Be careful not to pinch any wires.
4 . Finish attaching the Left Upright (62) with two
3/8" x 1 1/2" Screws (3), two 3/8" Star Washers
(2), and two 3/8" Nuts (4) as shown;
do not fully
tighten the Nuts yet. Be careful not to pinch
any wires.
Attach the Right Upright (not shown) as
described in steps 3 and 4.
Note: There are no
wires on the right side.
2
3
4
2
1
1
69
62
62
3
4
2
3