10
HOW TO USE THE ELLIPTICAL
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter (A).
If you do not do this, you may damage the console
displays or other electronic components.
IMPORTANT: Always plug the power adapter (A)
into the elliptical before you plug it into an outlet.
Plug the power
adapter (A) into
the receptacle on
the elliptical (see
assembly step 7
on page 9).
Then, plug the
power adapter
into an appropri-
ate outlet that is
properly installed in accordance with all local codes
and ordinances.
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons.
First, loosen the
upright knob (B).
Next, pull the
upright knob, pull
the upright (C)
backward until the
latch stops the
upright, and then
release the upright
knob.
Next, pull the
upright (C)
forward slightly,
lift the latch (D),
and then lower
the upright to the
folded position.
Hold the upright
in one of the
indicated loca-
tions (E) while
you lower the
upright; do not
hold the upper
body arms.
Next, hold the handle (F) on the front stabilizer and lift
the elliptical until it will roll on the wheels (not shown)
on the rear stabilizer. Then, carefully move the elliptical
to the desired location, and lower it to the floor.
When you are finished moving the elliptical, lift the
upright (C) to the vertical position and tighten the
upright knob (B).
A
B
C
F
C
B
C
E
D
