background image

11

HOW TO LEVEL THE ELLIPTICAL

If the elliptical 

rocks slightly on 

your floor dur-

ing use, turn 

one or both of 

the leveling feet 

beneath the rear 

stabilizer until the 

rocking motion is 

eliminated. 

HOW TO ADJUST THE POSITIONS OF THE 

PEDALS

Each pedal can 

be adjusted to 

several positions. 

To adjust each 

pedal, simply pull 

the pedal handle 

outward, move 

the pedal to the 

desired position, 

and then release 

the pedal handle 

into an adjustment 

hole beneath the 

pedal. Make sure to adjust both pedals to the same 

position. 

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder is designed for use 

with most full-size tablets. Do not place any other 

electronic device or object in the tablet holder. 

To insert a tab-

let into the tablet 

holder, set the 

bottom edge of 

the tablet in the 

tray. Then, pull the 

clip over the top 

edge of the tablet. 

Make sure that 

the tablet is firmly 

secured in the tablet holder. Rotate the tablet holder 

to the desired angle. Reverse these actions to remove 

the tablet from the tablet holder.

HOW TO EXERCISE ON THE ELLIPTICAL

To mount the elliptical, hold the handlebars or the 

upper body arms and step onto the pedal that is in the 

lower position. Then, step onto the other pedal. Push 

the pedals until they begin to move with a continuous 

motion. Note: The pedals can turn in either direc-

tion. It is recommended that you turn the pedals 

in the direction shown by the arrow; however, for 

variety, you can turn the pedals in the opposite 

direction.

To dismount the elliptical, wait until the pedals come to 

a complete stop. Note: The elliptical does not have 

a free wheel; the pedals will continue to move until 

the flywheel stops. When the pedals are stationary, 

step off the higher pedal first. Then, step off the lower 

pedal.

Leveling 

Feet

Handle

Pedals

Handlebars

Upper 

Body Arms

Summary of Contents for NordicTrack SpaceSaver SE7i





























Reviews: