15
15
15.
Orient the Upright Crossbar (105) as shown.
Carefully slide the Upright Crossbar (105)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar (105) with the four
5/16" x 3/4" Patch Screws (4) that you removed
in step 5 and four 5/16" Star Washers (11);
start
all four Patch Screws, and then tighten them.
11
4
11
90
89
105
4
H
14
14
26
Q
28
P
K
14. Firmly tighten the two 5/16" x 2 1/2" Screws (28)
on each side of the handrail assembly.
Next, identify the Right Handrail Cover (26).
Insert the tab (P) on the Right Handrail Cover
into the right handrail assembly (H) in the loca-
tion shown. Then, press the Right Handrail
Cover onto the console assembly (K). The Right
Handrail Cover should snap into the indicated
hole (Q).
Then, attach the Right Handrail Cover (26) with
a #8 x 1" Screw (14);
do not overtighten the
Screw.
Attach the Left Handrail Cover (not shown)
as described above.
Summary of Contents for NordicTrack T7.5 S
Page 5: ...5 all STANDARD SERVICE PLANS...
Page 37: ...37 NOTES...
