15
13. Carefully slide the Upright Crossbar (41)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four 5/16" x
3/4" Screws (4) that you removed in step 5 and
four 5/16" Star Washers (11); start all four
Screws, and then tighten them.
13
11 4
11
90
89
41
4
14
85
F
86
14
14
79
86
87
14
14
14. Identify the Right Handrail Cover (85). Set the
Right Handrail Cover on the right Handrail (86).
Start two #8 x 3/4" Truss Head Screws (14) into
the bottom of the Right Handrail Cover; do not
fully tighten the Truss Head Screws.
Next, slide the Right Handrail Cover (85) for-
ward until it rests against the console assembly
(F). Then, tighten the two #8 x 3/4" Truss Head
Screws (14); do not over tighten the Truss
Head Screws.
Then, attach the Right Bottom Handrail Cover
(88) with two 8 x 3/4" Truss Head Screws (14).
Attach the Left Handrail Cover (79) and the
Left Bottom Handrail Cover (87) in the same
way.
88
