27
3.
Customize the unit of measurement and other
settings.
To customize the unit of measurement, the time
zone, or other settings, touch
Equipment Info
or
Equipment Settings
, and then touch the desired
settings.
The console can display speed and distance in
either standard or metric units of measurement.
4.
View machine information or console app
information.
Touch
Equipment Info
, and then touch
Machine
Info
or
App Info
to view information about your
elliptical or about the console app.
5.
Update the console firmware.
For the best results, regularly check for
firmware updates.
Touch
Maintenance
, and
then touch
Update
to check for firmware updates
using your wireless network. The update will begin
automatically.
IMPORTANT: To avoid damaging
the elliptical, do not turn off the power while the
firmware is being updated.
The screen will show the progress of the update.
When the update is complete, the elliptical will turn
off and then turn back on. If it does not, press the
power switch into the off position. Wait for several
seconds, and then press the power switch into the
reset position. Note: It may take a few minutes for
the console to be ready for use.
Note: Occasionally, a firmware update may cause
the console to function slightly differently. These
updates are always designed to improve your
exercise experience.
6.
Calibrate the incline system.
To calibrate the incline system, touch
Maintenance
,
touch
Calibrate Incline
, and then touch
Begin
. The
frame will automatically rise to the maximum incline
level, lower to the minimum incline level, and then
return to the starting position. This will calibrate
the incline system. When the incline system is
calibrated, touch
Finish
.
IMPORTANT: Keep pets, feet, and other objects
away from the elliptical while the incline system
is calibrating.
7.
Exit the settings main menu.
If you are in a settings menu, touch the back
button. Then, touch the close button (x symbol) to
exit the settings main menu.
