ICON Health & Fitness NTEX02121.9, User Manual

19

 HOW TO SET UP THE CONSOLE

Before you use the studio cycle for the first time, set up 
the console. 

1.  

Connect to your wireless network.

 To use iFit workouts and to use several other 
features of the console, the console must be con-
nected to a wireless network. Follow the prompts 
on the screen to connect the console to your wire-
less network.

2.  

Customize settings.

 Follow the prompts on the screen to set the desired 
unit of measurement and your time zone. 

 Note: To change these settings later, see HOW TO 
CHANGE CONSOLE SETTINGS on page 25. 

3.  

Log into or create an iFit account.

 Follow the prompts on the screen to log into your 
iFit account or to create an iFit account.

4.  

Tour the console.

 The first time you use the console, a tour 
presentation will guide you through the features of 
the console. 

5.  

Check for firmware updates. 

 First, touch the menu button (three horizontal lines 
symbol), touch 

Settings

, touch 

Maintenance

, and 

then touch 

Update

. The console will check for firm-

ware updates. For more information, see HOW TO 
CHANGE CONSOLE SETTINGS on page 25.

 6.  

Calibrate the incline system.

 First, touch the menu button (three horizontal lines 
symbol), touch 

Settings

, touch 

Maintenance

, and 

then touch 

Calibrate Incline

. The frame will rise 

and lower as it calibrates. For more information, 
see HOW TO CHANGE CONSOLE SETTINGS on 
page 25. 

The console is now ready for you to begin working out. 
The following pages explain the workouts and other 
features that the console offers.

To use the manual mode,

 see page 19. 

To use a 

featured workout,

 see page 21. 

To create a draw-

your-own-map workout, 

see page 23. 

To use an 

iFit workout,

 see page 24.

To change console settings,

 see page 25.

 To 

connect to a wireless network,

 see page 26.

 To 

use the sound system, 

see page 27.

Note: If there is a sheet of plastic on the screen, 
remove the plastic. 

 HOW TO USE THE MANUAL MODE

 1.  

Touch the screen or press any button on the 
console to turn on the console.

 See HOW TO TURN ON THE CONSOLE on 
page 18. Note: It may take a few moments for 
the console to be ready for use.

 2.  

Select the main menu.

 When you turn on the console, the main menu will 
appear on the screen after the console boots up. 

 If you are in a workout, touch the screen and follow 
the prompts to end the workout and return to the 
main menu. If you are in the settings menus, touch 
the back button (arrow symbol) and then touch the 
close button (x symbol) to return to the main menu.