ICON Health & Fitness NTL14114.0, User Manual

20

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to 

cold temperatures, allow it to warm to room tem-

perature before you turn on the power. If you do 

not do this, you may damage the console displays 

or other electrical components.

Plug in the power cord 

(see page 18). Next, 

locate the power switch on 

the treadmill frame near 

the power cord. Press the 

power switch into the reset 

position. 

 IMPORTANT: The console features a display demo 

mode, designed to be used if the treadmill is dis-

played in a store. If the demo mode is turned on, 

the screen will show a demo presentation after you 

plug in the power cord and press the power switch 

into the reset position, before you insert the key. To 

turn off the demo mode, see step 7 on page 28. 

 Next, stand on the 

foot rails of the 

treadmill. Locate 

the clip attached to 

the key, and slide 

the clip securely 

onto the waistband 

of your clothes. 

Then, insert the key 

into the console. Note: It may take a minute for the 

console to be ready for use. IMPORTANT: In an 

emergency, the key can be pulled from the console, 

causing the walking belt to slow to a stop. Test the 

clip by carefully taking a few steps backward; if the 

key is not pulled from the console, adjust the posi-

tion of the clip.

Note: The console can display speed and distance in 

either miles or kilometers. To find which unit of mea-

surement is selected, see step 4 on page 28. For 

simplicity, all instructions in this section refer to miles.

HOW TO USE THE TOUCH SCREEN

The console features a tablet with a full-color touch 

screen. The following information will help you become 

familiar with the tablet’s advanced technology: 

•    The console functions similarly to other tablets. You 

can slide or flick your finger against the screen to 

move certain images on the screen, such as the 

displays in a workout (see step 5 on page 22). 

However, you cannot zoom in and out by sliding your 

fingers on the screen. 

•    The screen is not pressure sensitive. You do not 

need to press hard on the screen.

•    To type information into a text box, touch the text box 

to view the keyboard. To use numbers or other char-

acters on the keyboard, touch the ?123 button. To 

view more characters, touch the Alt button. Touch the 

Alt button again to return to the number keyboard. To 

return to the letter keyboard, touch the ABC button. 

To use a capital character, touch the button with an 

upward-facing arrow. To use multiple capital charac-

ters, touch the arrow button again. To return to the 

lowercase keyboard, touch the arrow button a third 

time. To clear the last character, touch the button 

with a backward-facing arrow and an X.

   Use the buttons on the console to navigate the 

tablet. Press the home button to return to the main 

menu. Press the settings button to access the set-

tings main menu (see page 28). Press the back 

button to return to the previous screen.

Reset

ETNT14114

ETRB14013

(RBTL14013)

Key

Clip

Back

Home

Settings