background image

29

11. Enable or disable a passcode.

  

The console features a child-safety passcode, 

designed to prevent unauthorized users from using 

the treadmill.

  

Touch the Passcode button. To enable a pass-

code, touch the Enable checkbox. Then, enter a 

4-digit passcode of your choice. Touch Save to use 

this passcode. Touch Cancel to return to the equip-

ment settings mode and not use a passcode. To 

disable the passcode, touch the Disable checkbox.

   Note: If a passcode is enabled, the console will 

regularly ask for you to enter the passcode. The 

console will remain locked until the correct pass-

code is entered. IMPORTANT: If you forget your 

passcode, enter the following master passcode 

to unlock the console: 1985.

12. Set a safety screen timeout.

   The console features an automatic screen reset; if 

no buttons are touched or pressed and the walking 

belt does not move for a set amount of time, the 

console will automatically reset.

   To set the amount of time the console will wait 

before it automatically resets, touch the Safety 

Screen Timeout button to view a list of times. Then, 

select the amount of time desired. Touch the back 

button on the screen.

13. Exit the equipment settings mode.

  

To exit the equipment settings mode, touch the 

back button on the screen.

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console 

sound system while you exercise, plug a 3.5 mm male 

to 3.5 mm male audio cable (not included) into the jack 

on the console and into a jack on your MP3 player, 

CD player, or other personal audio player; make sure 

that the audio cable is fully plugged in. Note: To 

purchase an audio cable, see your local electronics 

store. 

Next, press the play button on 

your personal audio player. 

Adjust the volume level using the 

volume increase and decrease 

buttons on the console or the 

volume control on your personal 

audio player. 

If you are using a personal CD player and the CD 

skips, set the CD player on the floor or another flat 

surface instead of on the console.

ETNT14114

Summary of Contents for NTL14114.0













































Reviews: