background image

29

 HOW TO FOLD AND MOVE THE TREADMILL

 HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline 
to zero before you fold the treadmill. Then, remove 
the key and unplug the power cord. CAUTION: You 
must be able to safely lift 45 lbs. (20 kg) to raise, 
lower, or move the treadmill.

1.    Hold the metal frame (A) 

fi

 rmly in the location 

shown by the arrow below. 

CAUTION: Do not hold 

the frame by the plastic foot rails. Bend your 
legs and keep your back straight.

2.  

Raise the frame (A) until the storage latch (B) locks 
in the storage position.

 CAUTION: Make sure that 

the storage latch locks.

 

 

To protect the 

fl

 oor or carpet, place a mat under 

the treadmill. Keep the treadmill out of direct 
sunlight. Do not leave the treadmill in the storage 
position in temperatures above 85°F (30°C).

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, fold it as described at the 
left. 

CAUTION:  Make sure that the storage latch is 

in the locked position. Moving the treadmill may 
require two people.

1.    Hold the frame (A) and one of the handrails (C), 

and place one foot against a wheel (D).

2.     Pull back on the handrail until the treadmill will roll 

on the wheels, and carefully move it to the desired 
location. 

CAUTION: Do not move the tread-

mill without tipping it back, do not pull on the 
frame, and do not move the treadmill over an 
uneven surface.

3.    Place one foot against a wheel, and carefully lower 

the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.     Push the upper end of 

the frame forward, and 
gently press the upper 
part of the storage latch 
with your foot at the 
same time.

2.     While pressing the stor-

age latch with your foot, 
pull the upper end of the 
frame toward yourself.

3.  

Step back and let the 
frame lower to the floor.

1

A

2

A

B

C

D

A

1

1

2

Summary of Contents for NTL14221.2









































Reviews: