11
5.
Identify the #8 x 3/4" Screws (5).
IMPORTANT:
Do not confuse the #8 x 3/4" Screws with the
#8 x 3/4" Truss Head Screws (24). The #8 x
3/4" Truss Head Screws have flatter heads.
Attach the Tray (79) to the left and right Tray
Brackets (76) with four #8 x 3/4" Screws (5);
start all four Screws, and then tighten them.
Make sure that no wires are pinched.
6.
Connect the two fan wires (A).
The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Next, insert the connectors through the looped
tie as shown. Then, pull the tie tight and cut off
the excess tie.
5
6
5
5
76
Tie
79
Front View
76
Wires
Bottom
View
7. Attach the two Handrails (74) to the left and right
Uprights (84) with two of the 5/16" x 3" Screws
(88) and two of the 5/16" Star Washers (8) that
you removed in step 3;
do not fully tighten
the Screws yet. Be careful not to pinch the
Upright Wire (83) or the fan wire (A). Position
the wires in the cutouts as shown.
Then, remove and discard the two indicated
screws (D).
D
A
84
74
8
7
88
88
D
83
74
8
84
Summary of Contents for NTL22115.0
Page 5: ...5...
