9
5
76
76
96
94
76
5. Tip: Avoid pinching the wires. Insert the
Upright (2) into the Frame (1).
Attach the Upright (2) with six M10 x 20mm
Screws (76); start all the Screws, and then
tighten them.
Then, connect the Upper Wire (94) to the Main
Wire (96).
Avoid pinching
the wires
Avoid pinching
the wires
6
6. Locate the wire tie (D) in the top of the Upright
(2) and pull the Upper Wire (94) out of the
Upright. Then, untie and discard the wire tie.
Tip: Avoid pinching the wires. Orient the Wire
Cover (20) so that the tab (E) is in the location
shown. Attach the Wire Cover to the Frame
(1) and the Upright (2) with two M4 x 16mm
Screws (115).
115
E
20
94
2
2
1
1
D
